Home / Unwinders/Payoffs / Rim Driven /

605 Rim Drive Payoff

Our Rim Drive Payoffs are designed to provide a flexible unwinding system designed for the smooth pay-off of ferrous and non-ferrous metal strip or flatware. These units are commonly used for punch press and stamping operations.

The Model 605 Rim Drive Payoff allows spools to be rolled into the machine by use of the built in steel plate ramp. This enables the operator to load the spool for payoff without physically lifting the spool. A built in feature consisting of the chain drive between the gear reducer and drive roller will facilitate future speed changes as production speed may require.

Each of these units can operate with a number tension control options including the standard STC (counterbalance dancer), an articulated broken arm dancer for punch press operations, and a Telesensor, ultrasonic loop controller. These choices allow the rim drives to provide superior pay off performance at a low cost.

Specifications

Dancer TypeSTC Standard
Drive1/2 hp DC
Frequency60 Hz
Hand TypeLeft or right hand configurations available
Max. Package O.D.36 in
Max. Package Weight2000 lb
Max. Package Width12 in
Max. Unwinding Speed150 fpm
Phase1
Unwind Tension STC8 to 32 oz
Voltage110 V

Benefits

1) Economical Alternative
2) Minimized load time
3) Larger continuous unwinds
4) Fewer set-ups, Reduced set-up time, lower operating costs, safer operating environment
5) Can be used for a wide range of strip, tube, and profile material.

Note

Although Ruesch Machine Company offers several standard products, each is infinitely customizable as determined by customer need. Machine specifications are subject to change based on the individual requirements. Ruesch Machine Company provides unique, application specific, solutions.